After installing the Seccua software shipped with your system or downloaded from our website, either attach the USB cable to both, you computer and the control and wait until Windows signals the the drivers are installed properly and ready for use.

Then enter the menu "communication", select the "Connection wizard", select "USB" and connect to your Seccua Filtration system. 

If you want to connect through CAN BUS, select "CAN-BUS" in the Connection Wizard, click continue, skip the next menu (Advanced config), select "UF (Control Pro of a Virex Pro or Phoenix unit), click continue, enter the BUS ID of the unit, which you want to connect to, then connect. Of course, you have to connect your computer to the CAN BUS before using a Seccua USB-CAN BUS Dongle.

Once connected, you can read from and write into the control.

The connection will time out after a while, then pls re-connect.