There have been some small changes in our product. Therefore, please click on the different tabs above to look up the corresponding information for your individual product.
For products purchased until February 2022, please click on the tab named "Until February 2022".
For products purchased from February 2022 onwards, please click on the tab named "From February 2022".
Piping to and from the Seccua BioFilter must be prepared before the installation of the Seccua BioFilter:
● To protect the filter against abrasive particles, which may occur in your feed-water, such as metal- or plastic-debris or gravel, a strainer with a maximum mesh size of 300µm needs to be installed.
● In the feed water line and in the filtered water line an extra shut-off valve must be installed. In the filtered water line you may use a check-valve instead.
Piping to and from the Seccua BioFilter must be prepared before the installation of the Seccua BioFilter:
● To protect the filter against abrasive particles, which may occur in your feed-water, such as metal- or plastic-debris or gravel, a strainer with a maximum mesh size of 300µm needs to be installed.
● In the feed water line and in the filtered water line an extra shut-off valve must be installed. In the filtered water line you may use a check-valve instead.